OBD2.LTD BLOG – Page 14 – OBD2.ltd OFFICIAL BLOG

How to set up CAT ET software for Cat Adapter 3 Ethernet connection

The new CAT adapter 478-0235 supports Ethernet connection, but you need to set up Ethernet connection type in CAT ET

The below procedure will clear all old versions of manufacturer software, which may be causing the X431 device to have

Is it very possible because the OBD cable, or little chance due to the device. OBD test cable testing method:

Procedures: Connect a supported Noregon adapter using the appropriate Off-Highway cable. If using a USB connection, also connect the USB

In cases where an engine ECU is replaced, or a calibration is corrupted the following process should be used to

Owning a powerful European vehicle is a dream for many people. When you are an owner of an Audi, Volkswagen,

Porsche is one of the most sought-after vehicle brands in the world, recognized for its powerful engines and stylish styling.

In some repair situations you will need to perform a dead zone adjustment. This post provides a dead zone setting

In the modern automotive landscape, diagnostic software plays a crucial role in the maintenance and troubleshooting of BMW vehicles. Gone

If you’re a Ford owner or technician, you may have heard about the FDRS and IDS software. These are diagnostic