Auto ECU Programmer – OBD2.LTD BLOG

How to read and write Micro, Flash and eeprom on Mercedes by Ktag

One customer shared his experience about Ktag ECU programmer. He used Ktag to read and write Micro, Flash and eeprom

Customer problem: I connected new kt200 and my laptop via usb cable, and installed the ktsuit manager program and ktsuit

PCMtuner ECU Programmer read, write and clone Audi a4 transmission TCU VL300 successfully. Using Module 58 bsl mode. Pcm tuner

Acdelco tds (GM Chevrolet online programming) works perfectly with PCM tuner. Using pcmtuner as j2534 passthru interface. Example: Programming a

KT200-ECU Programmer Reading and Writing VW EDC 16U1 Eeprom Tutorials: Firstly: Connect the KT200-ECU Programmer to the VW EDC 16U1-ECU

Firstly, Many thanks to the users for their support and love for PCMtuner. After the 1.2.7 version update, all users

MPM Has all GM protocols, OBD read ECM and TCM. All work in OBD, no need damaos for GM cars.

PCMtuner ECU Chip Tuning Tool Installation Guide Preparation before installation: 1 Connect the device to the computer with power cable

Test BMW F30 316i N13 engine with ICOM ISTA. ISTA gives faulty DME with Valvetronic and ignition and injection relay

Recently, some customers gave feedback that they cannot find the appropriate guide and pinout for their ECUs in the PCMTuner