How to Identify and Fix Mongoose JLR Pro Clone Cables

Identifying Mongoose Pro JLR Clone Cables

Original vs Clone Differences

A few years ago, Mongoose Pro JLR clones were almost identical to the original Mongoose Pro, with stable connections to vehicles. However, recent clones (from the end of 2022 onwards) have significant differences:

  • Original and Early Clones: These had PCBs and components nearly identical to the original Mongoose Pro, including an ATMEL chip.
  • Recent Clones (2023-2024): These have a different PCB layout and components. The ATMEL chip has been replaced with a BGA package instead of QFP.

PCB Comparison

  • Original Mongoose Pro JLR: Features an ATMEL chip and standard PCB layout.
  • 100% Good Clone: Almost identical to the original, stable in operation.
  • 2023 Mongoose Pro Clone: Different PCB with new components.
  • 2024 Mongoose Pro Clone: Further variations in the PCB design.

Issues with Cheap Clones

While the cheap clones work fine with original Mongoose Pro JLR drivers, they often have issues connecting to vehicles, particularly with Toyota/Lexus cars using Techstream, leading to the “Unable to connect to VIM” error. This issue is due to the design of the clone device, not the software or drivers.

Fixing Mongoose JLR Pro Clone Connection Issues

To fix the connection issue:

  1. Identify the Chassis Ground and Signal Ground Pins:
    • Chassis Ground: Pin 4
    • Signal Ground: Pin 5
  2. Connect the Pins:
    • Use a piece of wire to connect pins 4 and 5.
    • Alternatively, install a jumper to switch the connection ON/OFF as needed.

This fix resolves connection issues, allowing users to read MS-CAN and HS-CAN with recent mongoose clones from China.

Alternatives to Mongoose JLR Pro Clones

Recommended Replacements

  • VXDIAG VCX SE
  • Xhorse MVCI Pro
  • Openport
  • Godiag J2534

Considerations for Reprogramming

  • Mongoose Cable Clone: Not reliable for reprogramming modules or keys but suitable for JLR beginners or DIYers.
  • MY18+ Vehicles: Require a suitable interface like JLR Bosch DOIP or VCX SE DoIP VCI.
    • VCX SE DoIP VCI: Approved J2534 interface for online programming via an online account. It can also serve as a J2534 passthru device for OEM diagnostic programs like ODIS, Techstream, Xentry passthru, etc.

By following these guidelines, you can effectively identify, fix, and find suitable alternatives for Mongoose JLR Pro clone cables.

Leave a Reply

Your email address will not be published. Required fields are marked *