This post will highlight the Yanhua Digimaster 3 operation guide including odometer correction
Odometer Adjustment
-IC Adjusting
-ICP Adjusting
-OBD Adjusting
Related Product
1.IC Adjusting
De-solder the chip from the odometer, and solder it back after adjusted.
Note: To make sure the data was safe, please save the original data before change it by yourself.
Step 1: Click on“Odo adjuster”on the homepage
Choose the car model of the odometer.
For example: American vehicles- Chrysler
Step 2: Take Dodge Ram for example, de-solder the memory chip on the odometer board, and solder the chip to the OBP adapter.
Step 3: Save the data and enter the expected mileage
Step 4: Adjust succeed, click on “Exit”.
Solder the chip back to the odometer
2.ICP Adjusting
Take American vehicles-Chrysler-300K for example:
Step 1: Enter Digimater 3 odometer correction master main menu
Choose“Program BCM module”
Solder the wires to the welding spot of the odometer
Then click “Next”
Step 2: Save the data and enter the expected mileage
Step 3: After it prompted succeed, click on “close”
De-solder the wires off the odometer
3.0BD Adjusting
Take European Vehicles-VW for example
Step 1: Choose“Diagnosis”
In this page it list all the models that can be adjusted via OBD way, here we choose “Auto detect”, it can identify the car
model automatically
Step 2: Check the outfit of the cable
Insert the OBD cable to the Diagnosis port
Click“Next”
Step 3: Enter the expected mileage
