How to Disable Ford Focus Automatic Door Lock by Yourself

This article focus on how to disable Ford Focus automatic door lock,hope it can give you some helpful info.

Procedures:

Step 1
Confirm that the perimeter alarm is disarmed.

 

Step 2
Close all doors.

 

Step 3
Confirm that the ignition switch is in the OFF position.

 

Step 4
Turn the ignition switch from OFF to RUN.

 

Step 5
Press the power door lock UNLOCK button three times.

 

Step 6
Turn the ignition switch from RUN to OFF.

 

Step 7
Press the power door lock UNLOCK button three times.

 

Step 8
Turn the ignition switch from OFF to RUN.

 

Step 9
Verify that the RAP module chirps the horn. This indicates that the RAP module is now in the enable/disable mode and ready to accept program changes.

 

Step 10
Press the power door lock UNLOCK button one time to command the RAP module to toggle the autolock/relock feature ON or OFF.

 

Step 11
Press the power door lock LOCK button once to enter the command.

 

Step 12
Verify that the vehicle horn chirps one time to signal the RAP module confirmation of the command. There should only be one chirp indicating that the autolock/relock feature has been disabled. If one chirp is heard, followed by a longer honk, the autolock/relock feature has just been enabled. Return to step 10.

 

Step 13
Turn the ignition switch to the OFF position to exit the enable/disable mode.

 

Step 14
Verify that the RAP module chirps the horn once to indicate that a feature has been changed.

Done!

Leave a Reply

Your email address will not be published. Required fields are marked *