GDS VCI (Global Diagnostic System Vehicle Communication Interface) diagnostic tool is compatible with fully electric Hyundai vehicles.
It provides comprehensive coverage for all Hyundai models, including electric and hybrid cars.
However, compatibility can depend on the specific model year of your vehicle and the software version of your GDS VCI Diagnostic tool. For instance, some users have reported challenges when using the GDS VCI with Hyundai models from 2018 onwards. A common workaround involves modifying the Vehicle Identification Number (VIN) during the diagnostic process to reflect an earlier model year, such as 2017. This method has been discussed in various forums, with users sharing their experiences and solutions.
It’s also important to note that the GDS VCI software is typically designed to operate on specific operating systems. Some versions may require Windows 7 for proper communication with the vehicle’s systems, as later versions of Windows might lack the necessary legacy.NET framework components.
Additionally, ensure that your GDS VCI firmware is up to date. Firmware versions prior to 2.24 may not include support for newer models like the loniq.
Updating both the software and firmware can enhance compatibility with your electric Hyundai vehicle. You can perform a Transmission Control Module (TCM) reset and gearbox relearn using the GDS VCI diagnostic tool.
Here’s how you can do it:
Requirements:
GDS VCI Diagnostic Tool: Ensure it’s compatible with your vehicle and supports TCM functions.
Laptop or Tablet: The diagnostic tool needs to be connected to a device with the GDS VCI software installed.
GDS VCI Software: Install the correct version of the software on your laptop or tablet. Verify that it includes support for your vehicle model and year.
Steps to Perform a TCM Reset and Gearbox Relearn
- Connect the Tool
- Plug the GDS VCI into the OBD-Il port of your Hyundai (usually under the dashboard).
- Connect the GDS VCl to your laptop or tablet via USB or Bluetooth, depending on the model.
- Launch the GDS VCI Software:
- Open the GDS software on your device.
- Select your vehicle model and year from the software’s menu.
- Navigate to TCM Functions:
- Go to the “Control Unit” menu.
- Select “Transmission Control Module (TCM).”
Look for the options for “Reset” or “Gearbox Relearn.”
Perform the Reset:
Follow the on-screen instructions to reset the TCM. This will clear any stored adaptive values.
Initiate the Gearbox Relearn:
After the reset, the software may prompt you to perform a relearn procedure.
This typically involves driving the vehicle under specific conditions (e.g., accelerating,decelerating,and shifting through gears) to allow the TCM to recalibrate.
Complete and Verify:
Once the relearn is complete, the software should confirm that the process was successful.
Test-drive the vehicle to ensure smooth gear shifting.
Additional Tips:
Power Source: Ensure your laptop or tablet is fully charged or connected to a power source during the process.
Stable Connection: Maintain a stable connection between the GDS VCI and your device.
Firmware and Software Updates: Keep the GDS VCI firmware and software up to date for optimal functionality.
Safety Precautions: Perform the relearn in a safe area, such as a parking lot or low-traffic road.
In summary, while the GDS VCI diagnostic tool is designed to work with fully electric Hyundai vehicles, it’s crucial to verify that both your software and firmware are current and that your operating system is compatible to ensure optimal functionality.
Tips on using GDS VCI Interface:
- Operating System:Windows XP/Windows 7.
- Kia and Hyundai software can not be installed on the same computer. Before install Kia software, it must install hyundai master dvd, otherwise it will cause thesoftware install not success
- Never try to update the software, otherwise the circuit board will be burned, need return it back for repair,and you will pay all the maintenance cost and shipping cost back and force, because such damage is not free in the warranty policy.
- Included software Mainly work on Hyundai and Kia in North America vehicles models, please use OBD software for Hyundai Kia.
- for Car Key programming and ECU programming , please use other professional key programmer and ECU Prorammer.