How to Diagnose a Toyota FJ Using Autel IM608 II

In this tutorial, you will learn how to diagnose a Toyota FJ using the Autel IM608 II.

Equipment Needed:

1. Autel IM608 II
2. Autel J2534 device
3. Toyota FJ
   

Procedure:

1. Connect the OBD Port:
   • Connect the OBD port of the Autel J2534 device to the car’s connector.
     
2. Power On and Initial Setup:
   • Power on the IM608 II.
   • Input your password.
   • Start the car’s ignition.
3. Access Diagnostics:
   • Navigate to the “Diagnostics” section on the IM608 II.
   • Click on the “Toyota” button.
   • Agree to the disclaimer.
     
4. Vehicle Identification:
   • Opt for “Automatic selection” and click “Read” to allow the system to automatically identify the vehicle’s VIN number.
     
5. Region and Model Selection:
   • Select “Japan”.
   • Choose “08/2012 later” (or the appropriate model year for your vehicle).
   • Click “Yes” to confirm.
     
6. Perform Auto Scan:
   • Press “Diagnosis”.
   • Click “Auto scan” to let the Autel IM608 II perform a comprehensive scan of the vehicle automatically.
     
7. Clear Faults:
   • After the scan is complete, proceed to clear any faults.
   • Click on “Quick Erase” to clear all detected faults.
     

Following these steps will allow you to effectively diagnose your Toyota FJ using the Autel IM608 II.