Some customer cant install the Alldata 10.53 or cant run this software after install the software.
Please note following information how to solve those problem.
1.First,if you pc has anti-virus software.pls close that. and if you pc is with network,disable the network or unplug the network cable.
Disable the local area connection.
2.Then open the hdd.open the alldata file. open the file”alldata 10.53\AllData.10.53.1000.101_Install_Disk_2013.08\AFW_10530813″
choose”set up”to install the softwarealldata .
as picture:
Choose accpet. choose next to finish set up
then,you can add you company infotmation,. i just writr 1.1.1.
beacuse there is no new crack for 10.53.so we use 10.52 crack.the fuction is same.
Here choose No
Choose this one alldata 10.52_Crack.only
open the file”Alldata.10.52_crack.only” copy the file”ace”,
and on the destop.
choose”properties”,choose”open file location”
then paste the file in this folder. Need replace the Ace.exe File. here choose’copy and replace”.
then the software installation has been finish.
open the alldata,.
now we add database to the alldata.
choose”data”
choose “device”
.
choose “connect”
beacuse each pc has differnt letter. so you need choose the right letter. It will depens which name is your alldata disk in.
for example .i put the alldata on H,so i choose “h”.
now we need to add databse. Add dm and imp.
Dm 1 is
Choose H copy.and the paste the data path. Here is what after H
you need choose”enable data caching”
then we add DM. DM TOTAL has 01-16,you need add one by one,. from dm 1 to dm 16 the data path you need to change name from 1 to 16 then click connect
Here show the data been added.
Next need add imp file. it is has imp01-imp70.watch the step in video
you must add one by one,from imp01-imp70.it is need long time.
after all the data been added ,.check ok.and then you can free to use the software now.
Click diagnosis and repair
Choose year