If you are a Nexiq USB LINK2 users, you know that it can work with many diagnostic software like Cat Et, Volvo PTT, Isuzu G-idss,,, but you need set correct adapter driver on related software. Here in this instruction we show you guide on how to set cat et diagnostic software work with nexiq usb link 2 adapter.
Preparations:
Caterpillar et software
NEXIQ USB LINK 2 Adapter
Run caterpillar et diagnostic software then click stop connect.
Select utilities preference modify
Select communications RP1210 Compliant device. Click advanced Button
Here select usb link nexiq usb link 2 then click ok.
Notice if your connection by wifi or Bluetooth. Pls select which you need.
Now it shows currect RP12010 Device is usb link 1 –Nexiq technologies usb link 2 click ok finish setup